Shaft Construction Hoist 1-2T

SC200(J) series Shaft Hoist

Maximum Lifting Height: 300 m
Lifting Speed: 0–50 m/min
Rated Load Capacity: 2000 Kg
Voltage: 380–500 V / 50-60 Hz
Application: high-rise building construction projects
Mast section 650*287 mm

XZJJ New Generation Builders Hoist for Cargos

The SC200(J) construction hoist for elevator shafts is a product independently developed by our company after thorough research into the installation and operation conditions of elevator shafts. It is specifically designed for installation within elevator shafts;

An optional fully automatic mode, also known as elevator mode;
With intelligent door opening and closing is available. The hoist cage is modular and can be used as either the left or right cage, facilitating assembly and disassembly within the shaft.

The cage height reaches 3.1 meters.

Mast section sizes 650*287 mm

Use a dedicated frequency converter, enabling intelligent self-detection, voice broadcasting, fault display, alarm and SMS notification, GPS remote communication, IoT remote monitoring, and open interfaces for integration with smart construction site or safety supervision department networks.

The transmission system uses a high-efficiency reducer, with an operating speed of 0-50 meters per minute. It supports both manual and automatic leveling control modes, and each floor can achieve intelligent call response.

The SC200(J) shaft construction hoist is intelligent, environmentally friendly, safe, reliable, technologically advanced, and industry-leading.

	SC100(J)	SC100(JD)	SC160(J)	SC160(JD)	SC200(J)	SC200(JD)
Rated Load	1000kg	1000kg	1600kg	1600kg	2000kg	2000kg
Boom rated Load	250kg	250kg	250kg	250kg	250kg	250kg
Lifting speed	0-50m/min	0-40m/min	0-50m/min	0-40m/min	0-50m/min	0-40m/min
Maximum lifting height	200m	200m	200m	200m	200m	200m
Motor power	11×2kw	9.5×2kw	15×2kw	11×2kw	18.5×2kw	13×2kw
Inverter power	30kw	22kw	37kw	30kw	45kw	37kw
Power capacity	40 kVa	30kVa	60kVa	40kVa	80kVa	50kVa
Safety anti-falling Device	SAJ3.0--1.2	SAJ3.0--1.2	SAJ4.0--1.2	SAJ4.0--1.2	SAJ4.0--1.2	SAJ4.0--1.2
Operation control method	Manual Control / Automatic Leveling / Fully Automatic Driverless
Cage space(L×W×H)m	（1.6--3.2）×1.45×3.1m		（1.6--3.2）×1.45×3.1m		（1.6--3.2）×1.45×3.1m
Power supply	380V/50Hz	380V/50Hz	380V/50Hz	380V/50Hz	380V/50Hz	380V/50Hz
Mast Section (mm)	650×287×1508	650×287×1508	650×287×1508	650×287×1508	650×287×1508	650×287×1508

Special Power Requirements: Please declare any special requirements regarding the power supply at the time of ordering.
Customization: The size of the hoist cage and the length of the tie-in brackets can be customized according to the user's requirements.
Height Extension: The installation height can be increased based on the user's requirements.